{"product_id":"10pin-till-16pin-obd2-adapterkabel-bmw","title":"ICOM-D 10-PIN to 16-PIN OBD2 Adapter Cable for BMW Motorcycles","description":"\u003ch2\u003e10-PIN to 16-PIN OBD2 Adapter Cable for BMW Motorcycles\u003c\/h2\u003e\n\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cp\u003eBMW motorcycles have long been equipped with advanced electronic control systems. Older models feature a round 10-pin diagnostic port that allows factory tools to communicate with the engine control unit and other ECUs. Since modern OBD2 tools use a standardized 16-pin connector, an adapter is needed to bridge the two worlds. This 10-PIN to 16-PIN adapter allows you to connect standard OBD2 equipment or BMW-specific devices such as \u003cstrong\u003eGS-911\u003c\/strong\u003e, \u003cstrong\u003eTuneECU\u003c\/strong\u003e, \u003cstrong\u003eINPA\u003c\/strong\u003e, \u003cstrong\u003eDIS\u003c\/strong\u003e, and \u003cstrong\u003eICOM\u003c\/strong\u003e. Both K-Line protocol and CAN-bus are supported, making the tool compatible with a wide range of motorcycle models. In combination with apps like MotoScan, you can read and clear fault codes on motorcycles from the late 1990s into the modern OBD2 era.\u003c\/p\u003e\n\u003cp\u003eThis cable addresses a growing need among BMW owners. Many want to perform simpler diagnostics at home, save money on workshop visits, and better understand their machines. With an adapter, you can use common Bluetooth dongles, OBDLink scanners, or more advanced USB interfaces to read fault codes, analyze live data, and perform service procedures. Since BMW motorcycles are often long-lived machines, with owners frequently upgrading, servicing, and customizing them personally, this cable is a practical aid. It is also plug-and-play: no soldering or modification is needed – just connect the round plug to the motorcycle and plug in your OBD2 scanner on the other side.\u003c\/p\u003e\n\u003ch2\u003eWhy is a 10-PIN adapter needed?\u003c\/h2\u003e\n\u003cp\u003eTowards the end of the 1990s, BMW started using a round 10-pin connector for diagnostics on motorcycles. This port handles K-Line (ISO 9141-2) and later also CAN-bus. At the same time, OBD2 was standardized for cars, but motorcycles were not required to comply with this standard until the mid-2010s. When OBD2 became mandatory for motorcycles, a new 16-pin port appeared on models from around 2017 onwards, but owners of older machines were left with the round connector. Therefore, adapter cables became common: they convert the round 10-pin connection to a 16-pin OBD2 female connector. This way, diagnostic tools like GS-911 and TuneECU can be connected to both types of ports.\u003c\/p\u003e\n\u003cp\u003eFor those who own multiple BMW motorcycles of different model years, this is very convenient. The same scanner can be used on a 2005 R1200GS and a 2018 F750GS by simply changing the adapter. This saves costs compared to needing several different cables. An additional reason is that OBD2 pins are more robust and inexpensive; the adapter cable is consumed instead of wearing out the motorcycle's built-in port. Furthermore, flexibility increases: you can connect Bluetooth dongles, Wi-Fi dongles, or USB interfaces without needing specialized equipment.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConnection Type:\u003c\/strong\u003e Round \u003cem\u003eBMW 10-pin\u003c\/em\u003e male to standard \u003cem\u003eOBD2 16-pin\u003c\/em\u003e female (J1962).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSignal Support:\u003c\/strong\u003e K-Line (ISO 9141-2), KWP2000, CAN ISO 15765, and proprietary BMW protocols.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePhysical Length:\u003c\/strong\u003e Typically around 30 cm – sufficient to reach from the motorcycle's port to a convenient position for the scanner.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Impact-resistant PVC sheath and copper cores, resistant to vibrations and weather.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Fits BMW motorcycles with a 10-pin round diagnostic port; works with diagnostic tools like GS-911, TuneECU, INPA, DIS, and ICOM.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSupported Tools:\u003c\/strong\u003e Most OBD2 scanners, including ELM327-based dongles, OBDLink series, K-DCAN cables, Bluetooth, and Wi-Fi dongles.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eOperating Environment:\u003c\/strong\u003e The adapter cable operates in temperatures from approximately –20°C to +60°C and is designed for the motorcycle environment.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003ch3\u003eFault Code Reading and Clearing\u003c\/h3\u003e\n\u003cp\u003eWith the adapter, you can connect an OBD2 scanner and read the engine control unit's fault codes. This includes generic codes (P0, P2, P3, and U0), manufacturer-specific codes (P1, P3, and U1), and so-called pending codes that have not yet triggered the check engine light. The cable also allows you to clear stored codes to turn off warning lights once the problem is resolved. This is particularly useful for confirming that a repair has been successful or for eliminating old faults that are no longer relevant.\u003c\/p\u003e\n\u003ch3\u003eLive Data and Sensor Data\u003c\/h3\u003e\n\u003cp\u003eAnother powerful tool in combination with this adapter is the ability to read live data. You can view engine RPM, throttle position, temperatures, lambda values, fuel pressure, and much more in real-time. Some tools display data graphically, making it easier to detect anomalies. Live data is invaluable for troubleshooting intermittent faults that do not generate fault codes, such as voltage drops, misfires, or fuel delivery issues.\u003c\/p\u003e\n\u003ch3\u003eService Functions\u003c\/h3\u003e\n\u003cp\u003eOn newer BMW motorcycles, there is a service indicator that reminds you when the next maintenance is due. With a compatible tool and this cable, you can reset the service indicator after service. You can also adjust idle speed screws, synchronize throttle bodies, and calibrate throttle controls. For engines with ride-by-wire, you can also run adaptation routines for throttle and clutch positions.\u003c\/p\u003e\n\u003ch3\u003eCoding and Customization\u003c\/h3\u003e\n\u003cp\u003eMore advanced tools – such as NCS Expert via INPA and ICOM – allow for coding certain functions. On some models, you can change display settings, activate DRL functions, configure turn signals, and the instrument panel language. Although this is more common on cars, BMW motorcycles have some adjustable functions that can be customized via diagnostic tools.\u003c\/p\u003e\n\u003ch3\u003eMulti-Module Diagnostics\u003c\/h3\u003e\n\u003cp\u003eAlthough motorcycles generally have fewer control units than cars, several ECUs exist: engine control, ABS\/ASC, instrument panel, suspension control, tire sensors, and sometimes fuel or immobilizer controllers. The adapter provides access to all module diagnostics via corresponding software, allowing you to see warnings for ABS or ASC faults, read DWA alarm systems, and program keys with the right equipment.\u003c\/p\u003e\n\u003ch2\u003eAdvantages and Strengths\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eBroad Support:\u003c\/strong\u003e The product supports both older K-Line communication and modern CAN-bus. This means the same cable works on motorcycles from the late 1990s up to around 2016.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility with Many Apps:\u003c\/strong\u003e Since the cable provides a standardized OBD2 female connector, you can use it with MotoScan, OBDLink apps, BimmerLink (limited), Car Scanner, and other generic OBD apps. This allows you to use a smartphone instead of a PC.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConnection to BMW-Specific Tools:\u003c\/strong\u003e For more advanced diagnostics, you can connect cables like GS-911 WiFi, USB interfaces for INPA\/DIS, or BMW A2 multiplexers for ICOM, as the adaptation to the round connector is included.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCost-Effective:\u003c\/strong\u003e Instead of buying expensive original tools, you can combine the adapter cable with an inexpensive ELM327 dongle (though beware that cheap ELM327 chips do not always support BMW protocols).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eRobust Design:\u003c\/strong\u003e The cable is designed to withstand vibrations, impacts, and temperature fluctuations that occur during motorcycle riding. The connectors are often gold-plated or galvanized for corrosion resistance.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePortable:\u003c\/strong\u003e Small and lightweight – takes up minimal space in the toolbox or saddlebag. Perfect for taking on long trips for quick troubleshooting if needed.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility with BMW Motorcycles\u003c\/h2\u003e\n\u003cp\u003eThe adapter fits BMW motorcycles with a \u003cstrong\u003eround 10-pin diagnostic port\u003c\/strong\u003e. Exact model years vary, but generally, the following guidelines apply:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eR-series:\u003c\/strong\u003e R850\/1150\/1200 models from approximately 1998 to 2016 (R1200GS, R1100S, R1150RT, R1200R). Newer LC models after 2017 use an OBD2 port.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eK-series:\u003c\/strong\u003e K1200\/1300 S\/R\/GT and K1600.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eF-series:\u003c\/strong\u003e F650GS Dakar, F700GS, F800GS\/Adventure up to approximately 2016.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eG-series:\u003c\/strong\u003e G650GS, G450X.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eC-series:\u003c\/strong\u003e C600 Sport, C650GT etc., with a 10-pin port.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eScooter \u0026amp; Electric:\u003c\/strong\u003e E-Scooter C Evolution (early model years).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eOther Brands:\u003c\/strong\u003e Some Husqvarna models (like Nuda 900) that used BMW electronics, but always check.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOn motorcycles from 2017 onwards with a 16-pin OBD2 port, no adapter is needed – you connect directly. For very old models (early 1990s), there is sometimes a 3-pin or 20-pin connector; in that case, a different adapter is required.\u003c\/p\u003e\n\u003ch2\u003eCompatibility with Tools and Apps\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMotoScan (Android)\u003c\/strong\u003e – Popular app for BMW motorcycles. Together with OBDLink LX\/MX+ or OBDLink EX, it provides troubleshooting, service reset, and coding functions.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eGS-911 (HexCode)\u003c\/strong\u003e – Professional tool available in USB and WiFi variants. With a 10-pin adapter, you can use GS-911 on older models.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eINPA \/ BMW Standard Tools\u003c\/strong\u003e – Requires Windows PC and K+DCAN cable. Via adapter, you can run INPA and NCS Expert for advanced diagnostics.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTuneECU\u003c\/strong\u003e – Primarily used for Triumph and KTM, but supports BMW F-series. Works via adapter.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eBimmerLink \/ BimmerCode\u003c\/strong\u003e – Apps are primarily for cars, but some functions work on motorcycles via an OBDLink dongle.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eGeneric OBD2 Apps\u003c\/strong\u003e – Torque Pro, Car Scanner, Forscan (limited), depending on protocol support. However, be aware that generic ELM327 dongles may lack support for certain BMW protocols.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eManual – Step-by-Step\u003c\/h2\u003e\n\u003ch3\u003e1. Preparations\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCheck Motorcycle Model:\u003c\/strong\u003e Check the manual to see if it has a round 10-pin port. Look often under the seat, near the battery, or close to the fuse box.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eChoose the Right Tool:\u003c\/strong\u003e Download an app like MotoScan or prepare GS-911\/INPA on your computer. Make sure your tool supports BMW motorcycles.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMount the Adapter Cable:\u003c\/strong\u003e Inspect that it is intact and clean. Check that the pins are not bent.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTurn Off Ignition:\u003c\/strong\u003e Ignition and lights should be off before connecting.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e2. Connection\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eConnect the \u003cstrong\u003eround 10-pin connector\u003c\/strong\u003e on the adapter to the motorcycle's diagnostic port. It is usually keyhole-shaped and clicks into place.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSecure the connector firmly. It should be snug but not twisted. If it doesn't fit – double-check that the port is 10-pin.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConnect your \u003cstrong\u003eOBD2 scanner\u003c\/strong\u003e to the 16-pin female connector on the adapter. This can be a Bluetooth dongle, OBDLink, K-DCAN cable, or GS-911 cable.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTurn on the ignition (the engine does not need to be started). The power supply from the battery activates the ECU and the OBD port.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e3. Diagnosis with Smartphone\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConnect:\u003c\/strong\u003e If you are using a Bluetooth dongle, pair the device with your phone. Start the app (e.g., MotoScan).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSelect Model:\u003c\/strong\u003e In the app, select the motorcycle model and ECU type.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eScan Fault Codes:\u003c\/strong\u003e Press \"Read Fault Codes\" for engine, ABS, and instrument panel. Note the codes and their descriptions.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eClear Faults:\u003c\/strong\u003e After rectifying the issue, you can select \"Clear Fault Codes\". The system will confirm that the codes have been removed.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eLive Data:\u003c\/strong\u003e To view sensor data in real-time, go to \"Live Data\" and select the channels you want to monitor.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e4. Diagnosis with Computer\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Drivers:\u003c\/strong\u003e If you are using a USB-based K+DCAN cable, install FTDI drivers.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStart Software:\u003c\/strong\u003e Open INPA, NCS Expert, or GS-911 PC software.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEnter COM Port:\u003c\/strong\u003e The software needs to know which COM port the cable uses. Adjust latency to 1 ms for stability.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSelect Correct Module:\u003c\/strong\u003e Navigate in the program to select engine, ABS, instrument, etc.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePerform Test:\u003c\/strong\u003e You can perform activation tests on fuel pumps, injectors, ignition coils, and throttle motors, depending on the motorcycle model.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e5. Service Reset\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAfter Service:\u003c\/strong\u003e When you have changed oil or filters, the instrument panel needs to be informed that service has been performed.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eVia App:\u003c\/strong\u003e Select \"Reset Service\" in MotoScan or GS-911, follow the steps to set a new service interval (e.g., 10000 km or 12 months).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConfirmation:\u003c\/strong\u003e The instrument panel's service indicator should turn off. If not, try again.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e6. Concluding Actions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eTurn off the ignition.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDisconnect the OBD2 device first, then the adapter cable from the motorcycle.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eStore the cable in a dry place. Ensure the rubber seal on the motorcycle's diagnostic port is back in place to prevent water ingress.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eFrequently Asked Questions (FAQ)\u003c\/h2\u003e\n\u003ch3\u003eDoes this adapter work on all BMW motorcycles?\u003c\/h3\u003e\n\u003cp\u003eIt fits the majority of models with a 10-pin round diagnostic port manufactured between the late 1990s and approximately 2016. Newer motorcycles after 2017 have a 16-pin OBD2 port and do not require an adapter. Very old models (early 1990s) may have a 3-pin or 20-pin connector.\u003c\/p\u003e\n\u003ch3\u003eCan I use a cheap ELM327 dongle?\u003c\/h3\u003e\n\u003cp\u003eYes, they work for basic fault code reading and clearing. However, cheap ELM327 clones sometimes have limited support for BMW protocols and may lack correct timing. For reliable communication, OBDLink dongles or FT232RL-based cables are recommended.\u003c\/p\u003e\n\u003ch3\u003eWhich apps support BMW motorcycles?\u003c\/h3\u003e\n\u003cp\u003eMotoScan (Android) is the most popular and offers full functionality. GS-911 is available as an app and PC program. TuneECU, Car Scanner, and some generic OBD apps can read basic data. INPA\/NCS Expert requires a Windows PC and advanced cables.\u003c\/p\u003e\n\u003ch3\u003eCan I damage the motorcycle's electronics?\u003c\/h3\u003e\n\u003cp\u003eIf you follow the instructions, the risk is low. Always connect with the ignition off, use the correct pin assignment, and turn off the ignition after diagnosis. When coding and programming, you should back up data and have stable voltage – otherwise, a module can be locked.\u003c\/p\u003e\n\u003ch3\u003eIs it possible to update ECU software via this cable?\u003c\/h3\u003e\n\u003cp\u003eFor simpler updates, yes, but it requires special programs (WinKFP, ISTA\/P) and more powerful interfaces. Many instead choose original tools (ICOM) or leave this to an authorized workshop. The adapter serves as a physical connection, but software and interface limit what you can do.\u003c\/p\u003e\n\u003ch3\u003eCan I use the cable on other brands?\u003c\/h3\u003e\n\u003cp\u003eAccording to the manufacturer, it is intended for BMW motorcycles. Some Husqvarna models that use BMW engines may work, but Ducati, Triumph, or Japanese brands have different diagnostic ports.\u003c\/p\u003e\n\u003ch3\u003eWhy doesn't the check engine light blink after clearing?\u003c\/h3\u003e\n\u003cp\u003eIf the fault code reappears immediately, it's because the problem has not been resolved. Check the fault code, address the cause (e.g., lambda sensor, TPS, ABS sensor), and clear again. Some codes require several driving cycles for the system to recognize that the fault has been rectified.\u003c\/p\u003e\n\u003ch3\u003eHow far can I extend the cable?\u003c\/h3\u003e\n\u003cp\u003eSince the signals are serial and relatively slow, extending by a meter or so works without major issues. However, the voltage margin decreases, and susceptibility to interference increases. Use shielded extension cables if necessary.\u003c\/p\u003e\n\u003ch3\u003eHow do I know if my motorcycle has a 10-pin port?\u003c\/h3\u003e\n\u003cp\u003eCheck the owner's manual or under the seat. The round 10-pin port resembles a small black cap with a rubber cover. The OBD2 port is rectangular. Unsure? Search for your vehicle model + \"diagnostic connector\" online.\u003c\/p\u003e\n\u003ch2\u003eTips and Advice for Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eAlways store the adapter in a protective case when not in use to prevent the pins from bending.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eEnsure the OBD2 tool has a strong enough Bluetooth signal if you are using an app – the motorcycle's metal chassis can block signals.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eKeep the motorcycle's battery well charged during diagnostics; low voltage can cause incorrect codes.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead up in forums and manuals before coding or programming; changing the wrong parameter can affect safety systems.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhen using computer programs – run as administrator on Windows to avoid driver problems.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUse a voltage stabilizer or battery charger during longer sessions, especially when logging or updating software.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTo avoid moisture and corrosion, spray the connectors with contact cleaner (e.g., CRC) after use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cp\u003eA typical package for this adapter contains:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e1 × 10-PIN to 16-PIN adapter cable (round BMW male to OBD2 female).\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSome retailers sell the cable together with an OBD2 dongle as a package, but this description refers only to the adapter cable.\u003c\/p\u003e\n\u003ch2\u003eDisclaimer and Important Notes\u003c\/h2\u003e\n\u003cp\u003eThis adapter is intended for diagnosis and service of \u003cstrong\u003eBMW motorcycles\u003c\/strong\u003e and should not be used on vehicles for which it was not designed. Always ensure you use the correct tools and software. Manufacturers and retailers are not responsible for damages caused by incorrect use, troubleshooting, or coding. Always follow safety instructions when working with vehicle electronics, such as not smoking near the battery and keeping strong magnetic fields away from sensitive components.\u003c\/p\u003e\n\u003cp\u003eSome software requires a license or registration; ensure you comply with license terms. Please note that the use of cheap ELM327 clones may result in poorer performance or limited functionality. Check compatibility with your motorcycle model before purchasing. The adapter cable should not be used for permanent installation, but only during diagnostic sessions.\u003c\/p\u003e\n\u003ch2\u003eSummary\u003c\/h2\u003e\n\u003cp\u003eThe 10-PIN to 16-PIN OBD2 adapter cable is an indispensable accessory for BMW motorcycle owners who want to troubleshoot and customize their machines themselves. It connects the round BMW diagnostic port to a standard OBD2 female connector, allowing the use of a wide range of tools such as GS-911, TuneECU, MotoScan, and INPA. The cable supports both K-Line and CAN-bus and works on models from the late 1990s to approximately 2016. By combining robust construction with plug-and-play installation, it offers flexibility for both the home mechanic and professional workshop. However, be careful to use reliable scanning equipment – cheap ELM327 clones may lack support for BMW's protocols. With this cable and a compatible scanner, you gain control over fault codes, service intervals, live data, and customizations – all to keep your BMW motorcycle in top condition.\u003c\/p\u003e","brand":"Felkodsläsare","offers":[{"title":"Default Title","offer_id":54177162952972,"sku":"FEL-A0154","price":13.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/4979\/6876\/files\/H464dbe2849354f498af12886b6da1b1ep.jpg?v=1766928224","url":"https:\/\/www.felkodslasare.se\/en-en\/products\/10pin-till-16pin-obd2-adapterkabel-bmw","provider":"Felkodsläsare","version":"1.0","type":"link"}