{"product_id":"bdm-pro-frame-ecu-brush-test-stand","title":"BDM PRO Frame with 4 probes - LED BDM frame \u0026 ECU test stand","description":"\u003ch2\u003eBDM PRO Frame with 4 Probes – LED BDM Frame \u0026amp; ECU Test Stand for FGTECH BDM100, KTM100, CMD, Dimsport, etc.\u003c\/h2\u003e\n\u003csection\u003e\n\u003cp\u003eThe \u003cstrong\u003eBDM PRO Frame 4 Probes\u003c\/strong\u003e (also known as the \u003cstrong\u003eLED BDM Frame with Mesh and 4 Probe Pens\u003c\/strong\u003e) is a stable and easy-to-use \u003cstrong\u003eECU test stand\u003c\/strong\u003e for those working with \u003cstrong\u003eBDM\/bench\u003c\/strong\u003e connections for diagnosis, service, and programming of vehicle control units. The stand is constructed from \u003cstrong\u003eacrylic (plexiglass)\u003c\/strong\u003e with a \u003cstrong\u003emesh\u003c\/strong\u003e and \u003cstrong\u003e4 adjustable probe pens\u003c\/strong\u003e for secure contact with the ECU's pads\/connection points. With proper adjustment, you get even pressure and stable contact, which reduces the risk of intermittent connections and unnecessary wear on the circuit board. A major advantage is that the design is made for \u003cstrong\u003eeasy installation and smooth handling\u003c\/strong\u003e – and according to product information, it should be usable without damaging the ECU's circuit board when used correctly.\u003c\/p\u003e\n\u003cp\u003eThe BDM frame is designed to work with common ECU tools such as \u003cstrong\u003eFGTECH\u003c\/strong\u003e, \u003cstrong\u003eBDM100\u003c\/strong\u003e, \u003cstrong\u003eKTM100\u003c\/strong\u003e, \u003cstrong\u003eCMD\u003c\/strong\u003e, \u003cstrong\u003eDimsport\u003c\/strong\u003e, and other similar \u003cstrong\u003eECU chip tuning\/ECU programmer\u003c\/strong\u003e platforms. The upgraded version can also be combined with a \u003cstrong\u003equick programming adapter plate\u003c\/strong\u003e (according to the description) to simplify the connection to the ECU's \"quick programming interface\" and provide a more stable workflow. The built-in \u003cstrong\u003eLED lighting\u003c\/strong\u003e is powered by \u003cstrong\u003eDC 12V\u003c\/strong\u003e, making it easier to work accurately even in poor light conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e This product is a professional tool for legitimate service and diagnostics. The manual below focuses on safe assembly, contact control, and workflow – not on bypassing immobilizers or manipulating functions. Always use the equipment on vehicles\/ECUs for which you have permission and authorization. ⚠️\u003c\/p\u003e\n\u003c\/section\u003e\n\u003chr\u003e\n\u003csection\u003e\n\u003ch2\u003eIntroduction – what is a BDM frame and why is it used?\u003c\/h2\u003e\n\u003cp\u003eA \u003cstrong\u003eBDM frame\u003c\/strong\u003e is a \u003cstrong\u003ebench stand\u003c\/strong\u003e that helps you establish stable contact between an ECU (engine control unit\/control unit) and a compatible programming tool when working \u003cstrong\u003eon the bench\u003c\/strong\u003e or in a workshop environment. Instead of \"holding probes by hand,\" the frame allows you to fix the ECU and adjust the probes with controlled pressure. The result is usually:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMore stable connection\u003c\/strong\u003e (less risk of intermittent contact during reading\/writing)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMore reproducible workflow\u003c\/strong\u003e (easier to repeat the same steps)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduced risk of accidental damage\u003c\/strong\u003e to circuit boards\/pads compared to improvised solutions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBetter ergonomics\u003c\/strong\u003e and organization at the workstation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe \u003cstrong\u003eBDM PRO Frame 4 Probes\u003c\/strong\u003e is an upgraded variant that combines a robust acrylic base, mesh, adjustable probes, and (in the LED version) illumination via \u003cstrong\u003e12V\u003c\/strong\u003e. It is designed to work with several mainstream devices and is described as compatible with \u003cstrong\u003eFGTECH\/BDM100\/CMD\/Dimsport\/KTM100\u003c\/strong\u003e, etc.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSpecifications (always in bullet points)\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct name:\u003c\/strong\u003e BDM PRO Frame 4 Probes \/ LED BDM Frame with Mesh and 4 Probe Pens\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Acrylic (plexiglass), mesh, and 4 probe pens\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e ECU brush\/write test stand – stand for ECU \"brush \u0026amp; write,\" modification, and programming\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible tools (according to product info):\u003c\/strong\u003e KTM100, FGTECH \/ BDM100 \/ CMD \/ DIMSPORT, etc.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvantages (according to product info):\u003c\/strong\u003e Easy installation and use, should not damage ECU circuit board when used correctly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct size:\u003c\/strong\u003e 248 × 193 × 151 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct weight:\u003c\/strong\u003e 830 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe weight:\u003c\/strong\u003e 49 g\/pc (4 pcs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal probe length:\u003c\/strong\u003e 230 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED lamp voltage:\u003c\/strong\u003e DC 12V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower adapter:\u003c\/strong\u003e 12V 500 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard configuration (according to list):\u003c\/strong\u003e main stand (assembled), 4 copper needles (2 red\/2 black), 4 cables (2 red\/2 black), 4 probes (2 fine\/2 coarse), 12V adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eKeywords, synonyms \u0026amp; relevant terms (SEO)\u003c\/h2\u003e\n\u003cp\u003eThis product can also be referred to as \u003cstrong\u003eBDM frame\u003c\/strong\u003e, \u003cstrong\u003eECU bench stand\u003c\/strong\u003e, \u003cstrong\u003eECU test stand\u003c\/strong\u003e, \u003cstrong\u003eECU brush stand\u003c\/strong\u003e, \u003cstrong\u003eBDM100 frame\u003c\/strong\u003e, \u003cstrong\u003eFGTECH BDM frame\u003c\/strong\u003e, \u003cstrong\u003eECU probe station\u003c\/strong\u003e, \u003cstrong\u003eECU programming stand\u003c\/strong\u003e, and \u003cstrong\u003ebench programming stand\u003c\/strong\u003e. Common related search terms include \u003cstrong\u003e4 probes\u003c\/strong\u003e, \u003cstrong\u003eprobe pens\u003c\/strong\u003e, \u003cstrong\u003emesh\u003c\/strong\u003e, \u003cstrong\u003eLED BDM frame\u003c\/strong\u003e, \u003cstrong\u003eKTM100\u003c\/strong\u003e, \u003cstrong\u003eCMD\u003c\/strong\u003e, \u003cstrong\u003eDimsport\u003c\/strong\u003e, and \u003cstrong\u003eKESS\u003c\/strong\u003e (according to the product description, compatibility with mainstream devices is mentioned).\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFeatures and applications\u003c\/h2\u003e\n\u003ch3\u003eStable fixture for ECU \"brush \u0026amp; write\"\u003c\/h3\u003e\n\u003cp\u003eThe main purpose of the stand is to hold the ECU stably and provide controlled pressure against contact points via the probes. This is particularly useful when you need \u003cstrong\u003estable communication\u003c\/strong\u003e during operations that require an unbroken connection.\u003c\/p\u003e\n\u003ch3\u003e4 probes with different needle types\u003c\/h3\u003e\n\u003cp\u003eThe package includes \u003cstrong\u003e4 probes\u003c\/strong\u003e, and according to the configuration list, two \u003cstrong\u003efine needles\u003c\/strong\u003e and two \u003cstrong\u003ecoarse needles\u003c\/strong\u003e are included. This makes it easier to adapt to different contact points and spaces on various ECU boards.\u003c\/p\u003e\n\u003ch3\u003eMesh + probe holder for even pressure\u003c\/h3\u003e\n\u003cp\u003eThe mesh part and probe holders help keep the probes in the correct position and with even pressure. Correct adjustment reduces the risk of a probe \"slipping\" and causing scratches or unnecessary wear.\u003c\/p\u003e\n\u003ch3\u003eLED lighting (DC 12V) for better precision\u003c\/h3\u003e\n\u003cp\u003eThe LED variant is powered by \u003cstrong\u003eDC 12V\u003c\/strong\u003e and provides better visibility of small contact points, especially when working under time pressure or in environments with varying light.\u003c\/p\u003e\n\u003ch3\u003eBroad support in workshop environments\u003c\/h3\u003e\n\u003cp\u003eAccording to product info, the stand can be used with several common ECU tools: \u003cstrong\u003eKTM100\u003c\/strong\u003e, \u003cstrong\u003eFGTECH\/BDM100\u003c\/strong\u003e, \u003cstrong\u003eCMD\u003c\/strong\u003e, \u003cstrong\u003eDimsport\u003c\/strong\u003e, etc. This makes the frame a flexible accessory in a workshop that handles various ECU workflows.\u003c\/p\u003e\n\u003ch3\u003eUpgraded design that can be used with quick adapter plate\u003c\/h3\u003e\n\u003cp\u003eThe upgraded version is described as compatible with a \u003cstrong\u003equick programming adapter plate\u003c\/strong\u003e, which can simplify connection to the ECU's quick mounting\/interface where such a solution is used.\u003c\/p\u003e\n\u003ch3\u003eMulti-function test stand (according to product text)\u003c\/h3\u003e\n\u003cp\u003eThe product text mentions that the stand can be used in several types of tests and programming operations (e.g., data management, upgrades, and other functions). We recommend always working within legal frameworks and following the documentation for your programmer and the ECU you are working with.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eAdvantages – why choose the BDM PRO Frame with 4 probes?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaster and more stable workflow:\u003c\/strong\u003e fixture and probes reduce intermittent connections and \"hand-held\" errors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGentler on the ECU board:\u003c\/strong\u003e controlled pressure and stable positioning reduce the risk of scratches and damage (with correct adjustment).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy assembly:\u003c\/strong\u003e designed to be easy to install and use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED light (12V):\u003c\/strong\u003e better visibility and precision on small contact points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible compatibility:\u003c\/strong\u003e works with several common ECU tools according to product info.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes cables and probes:\u003c\/strong\u003e complete starter kit with 4 probes, cables, and a 12V adapter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable plexiglass construction:\u003c\/strong\u003e good balance between weight, rigidity, and working area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eCompatibility – what tools and scenarios is it suitable for?\u003c\/h2\u003e\n\u003cp\u003eAccording to the product information, the BDM PRO Frame is intended for use with mainstream tools and platforms such as: \u003cstrong\u003eKTM100\u003c\/strong\u003e, \u003cstrong\u003eFGTECH\u003c\/strong\u003e, \u003cstrong\u003eBDM100\u003c\/strong\u003e, \u003cstrong\u003eCMD\u003c\/strong\u003e, \u003cstrong\u003eDimsport\u003c\/strong\u003e (and similar).\u003c\/p\u003e\n\u003cp\u003eIn practice, compatibility depends on:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhich \u003cstrong\u003eadapter plate\/connection method\u003c\/strong\u003e you use with your programmer\u003c\/li\u003e\n\u003cli\u003eThe ECU's \u003cstrong\u003eboard layout\u003c\/strong\u003e and the placement of contact points\u003c\/li\u003e\n\u003cli\u003eWhether you use \u003cstrong\u003efine or coarse needles\u003c\/strong\u003e (and how you adjust the probe pressure)\u003c\/li\u003e\n\u003cli\u003eThat you follow the \u003cstrong\u003etool's and ECU's documentation\u003c\/strong\u003e for correct connection and safe working method\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e We do not provide pinouts or steps to bypass protection. This is a work stand – your programmer and ECU documentation determine the exact connection.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eManual \/ installation guide – complete step-by-step (beginner-friendly, in HTML)\u003c\/h2\u003e\n\u003ch3\u003ePart 1: Preparations (safety \u0026amp; workspace)\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eESD protection:\u003c\/strong\u003e It is advisable to work with an ESD mat\/wrist strap if handling open circuit boards. Avoid static electricity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean workspace:\u003c\/strong\u003e Keep the workspace free of metal shavings, liquids, and loose screws that could short-circuit the board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGood lighting:\u003c\/strong\u003e Use the LED lighting (12V) or an additional work light to clearly see contact points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable power:\u003c\/strong\u003e If using a programmer and power adapter, ensure the power supply is stable and cables cannot be pulled loose.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLegal assignment:\u003c\/strong\u003e Ensure the work pertains to legitimate service\/diagnostics on an ECU for which you have permission.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003ePart 2: Unpack and check contents\u003c\/h3\u003e\n\u003cp\u003eVerify that you have the following parts (may vary between packages, but according to the lists in the product text):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 main stand (assembled) – BDM frame\u003c\/li\u003e\n\u003cli\u003e1 BDM frame with LED (acrylic base with LED)\u003c\/li\u003e\n\u003cli\u003e4 probes (2 fine needles + 2 coarse needles)\u003c\/li\u003e\n\u003cli\u003e4 cables for probes\u003c\/li\u003e\n\u003cli\u003e4 copper needles (2 red + 2 black) \/ probe pens according to configuration\u003c\/li\u003e\n\u003cli\u003e1 power adapter: 12V 500 mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePart 3: Assemble the stand (if anything is unassembled)\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlace the base flat:\u003c\/strong\u003e Place the frame on a flat, stable surface so it does not wobble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck mesh and holders:\u003c\/strong\u003e Ensure the mesh and probe holders are straight and adjustment screws move freely.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount the probes:\u003c\/strong\u003e Insert the probes into the holders. Use fine needles where contact points are small\/dense, and coarse needles where there is a larger surface area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTighten appropriately:\u003c\/strong\u003e Probes should be secure but not overly tight. Too tight can make fine adjustment difficult.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003ePart 4: Connect LED lighting (DC 12V)\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck adapter:\u003c\/strong\u003e Ensure your 12V adapter is rated 12V \/ 500 mA.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnect LED:\u003c\/strong\u003e Plug the 12V adapter into the LED input according to the stand's connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest:\u003c\/strong\u003e Turn on power and check that the LED lights evenly. If not: check contact and polarity if applicable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable management:\u003c\/strong\u003e Route the cable so it cannot get caught in probes or be pulled out.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003ePart 5: Prepare the ECU\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisconnect power:\u003c\/strong\u003e Ensure the ECU is not powered when opening\/handling it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen ECU (if relevant):\u003c\/strong\u003e Carefully open the ECU with the correct tools. Avoid bending the board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspect the board:\u003c\/strong\u003e Look for damage, corrosion, or dirt. Clean gently if necessary (e.g., with isopropanol and ESD-safe methods).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdentify contact points:\u003c\/strong\u003e Follow the documentation for your programmer\/adapter plate to find the correct pads\/connection points on the ECU board.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003ePart 6: Place the ECU in the frame\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition the ECU board:\u003c\/strong\u003e Place the ECU stably in the frame so it lies flat and cannot slide.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure if needed:\u003c\/strong\u003e Use the frame's supports\/fasteners to hold the board still without creating tension in the circuit board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid component pressure:\u003c\/strong\u003e Ensure the frame does not press on tall components or sensitive parts.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003ePart 7: Set up the probes (the most important step)\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRough adjustment:\u003c\/strong\u003e Move the probes to approximately the correct position over the contact points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFine adjustment:\u003c\/strong\u003e Adjust each probe so its tip is centered on its contact point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure – just right:\u003c\/strong\u003e Lower the probes to establish stable contact, but without pressing so hard that pads risk damage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck angle:\u003c\/strong\u003e The probe should go straight down to the contact. An oblique angle increases the risk of slipping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-check all four:\u003c\/strong\u003e When one probe is adjusted, another might shift slightly – check all of them again.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003ePart 8: Connect the cables to your programmer\/adapter plate\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eFollow documentation:\u003c\/strong\u003e Connect probes\/cables according to your programmer's manual and the adapter plate you are using.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed\/black logic:\u003c\/strong\u003e Red\/black is often used to distinguish signal\/power\/ground in different setups – but the exact connection depends on the system. Do not guess.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable cabling:\u003c\/strong\u003e Route cables so they do not pull on the probes when you touch the programmer.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003ePart 9: Contact check before operation\u003c\/h3\u003e\n\u003cp\u003eBefore performing any read\/write operations, it is recommended to check that the contact is stable:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisual inspection:\u003c\/strong\u003e All probe tips are centered on their contact points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStability test:\u003c\/strong\u003e Gently move the cable (very lightly) and observe that the probes do not slip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuity (optional but recommended):\u003c\/strong\u003e If you have a multimeter and know which points should have continuity according to your diagram, you can check continuity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED lighting:\u003c\/strong\u003e Adjust the light so you can clearly see the contact points throughout the process.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003ePart 10: Operate your programmer (safely)\u003c\/h3\u003e\n\u003cp\u003eStart your ECU tool and software according to the manufacturer's instructions. We strongly recommend that you:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlways start by \u003cstrong\u003ereading and saving a backup\u003c\/strong\u003e (if your workflow requires data management).\u003c\/li\u003e\n\u003cli\u003eAvoid interruptions during ongoing operations (intermittent connections\/power outages are a common cause of errors).\u003c\/li\u003e\n\u003cli\u003eDocument which ECU, method, and equipment you are using.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePart 11: Finish and disassemble\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish in software:\u003c\/strong\u003e Ensure all processes are complete.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisconnect power:\u003c\/strong\u003e Turn off the LED\/12V adapter and unplug if you need to move the stand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift probes:\u003c\/strong\u003e Lift the probes straight up to prevent them from slipping over pads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove ECU:\u003c\/strong\u003e Carefully lift the ECU board and store it in ESD-safe protection if needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight cleaning:\u003c\/strong\u003e Gently wipe down acrylic and probes. Store probes so their tips are not damaged.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eTips and advice for best results\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDon't rush probe adjustment:\u003c\/strong\u003e 90% of problems come from intermittent contact or incorrect positioning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse the correct probe:\u003c\/strong\u003e fine needles for small pads, coarse for larger areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAppropriate pressure:\u003c\/strong\u003e too hard can damage pads, too loose can cause interruptions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable cabling:\u003c\/strong\u003e allow cables to \"rest\" without pulling on the probes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED helps more than you think:\u003c\/strong\u003e good light reduces errors and saves time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackup routine:\u003c\/strong\u003e always save files with date, job number, and clear names.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESD and cleanliness:\u003c\/strong\u003e static electricity and dirt are the ECU's enemies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck measurements when possible:\u003c\/strong\u003e continuity test (with the correct diagram) can save hours of troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eTroubleshooting – common problems and simple solutions\u003c\/h2\u003e\n\u003ch3\u003eProblem: Tool loses contact or interrupts operation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCheck that the probes are \u003cstrong\u003ecentered\u003c\/strong\u003e on the contact points.\u003c\/li\u003e\n\u003cli\u003eReduce cable tension (cables can pull probes sideways).\u003c\/li\u003e\n\u003cli\u003eAdjust pressure slightly – \u003cstrong\u003etoo loose\u003c\/strong\u003e causes intermittent contact, \u003cstrong\u003etoo hard\u003c\/strong\u003e can cause the probe to \"spring\" and slip.\u003c\/li\u003e\n\u003cli\u003eGently clean contact points if they are oxidized\/dirty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProblem: LED does not light up\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCheck that the adapter is \u003cstrong\u003e12V 500 mA\u003c\/strong\u003e and securely connected.\u003c\/li\u003e\n\u003cli\u003eCheck that the cable is not damaged or loose.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProblem: Probes slip\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjust the angle so the probe goes straight down.\u003c\/li\u003e\n\u003cli\u003eEnsure the ECU board lies flat and does not flex.\u003c\/li\u003e\n\u003cli\u003eSwitch to fine\/coarse needle depending on pad size.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProblem: Difficult to keep the ECU stable\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjust the frame's supports so the board is not stressed on tall components.\u003c\/li\u003e\n\u003cli\u003eUse soft, ESD-safe support where needed (without covering contact points).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFrequently Asked Questions (FAQ)\u003c\/h2\u003e\n\u003ch3\u003e1) What is a BDM frame?\u003c\/h3\u003e\n\u003cp\u003eA bench stand that helps you hold the ECU and probes stably to achieve consistent contact during BDM\/bench work.\u003c\/p\u003e\n\u003ch3\u003e2) Does it fit FGTECH and BDM100?\u003c\/h3\u003e\n\u003cp\u003eYes, according to the product information, it works for \u003cstrong\u003eFGTECH\u003c\/strong\u003e and \u003cstrong\u003eBDM100\u003c\/strong\u003e as well as several other tools.\u003c\/p\u003e\n\u003ch3\u003e3) What other tools are mentioned as compatible?\u003c\/h3\u003e\n\u003cp\u003eKTM100, CMD, Dimsport, etc. are mentioned in the product text.\u003c\/p\u003e\n\u003ch3\u003e4) Is this a programming tool itself?\u003c\/h3\u003e\n\u003cp\u003eNo, it is a \u003cstrong\u003estand\/adapter frame\u003c\/strong\u003e used in conjunction with a programmer and the correct adapter plate\/connection method.\u003c\/p\u003e\n\u003ch3\u003e5) Does it have LED lighting?\u003c\/h3\u003e\n\u003cp\u003eYes, the LED variant is powered by \u003cstrong\u003eDC 12V\u003c\/strong\u003e and the adapter is specified as \u003cstrong\u003e12V 500 mA\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003e6) Can the frame damage the ECU board?\u003c\/h3\u003e\n\u003cp\u003eAccording to product info, it should not damage the circuit board when used correctly. However, incorrect pressure or slipping probes can cause wear, so adjustment is important.\u003c\/p\u003e\n\u003ch3\u003e7) What does \"4 probes\" mean in practice?\u003c\/h3\u003e\n\u003cp\u003eThat you have four adjustable probe pens to make contact with four points, depending on the method and adapter solution.\u003c\/p\u003e\n\u003ch3\u003e8) Are both fine and coarse needles included?\u003c\/h3\u003e\n\u003cp\u003eYes, the list states \u003cstrong\u003e4 probes (two fine needles and two thick needles)\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003e9) Is it difficult to assemble?\u003c\/h3\u003e\n\u003cp\u003eNo, it is described as easy to install and use. What requires the most precision is the probe adjustment.\u003c\/p\u003e\n\u003ch3\u003e10) What are the dimensions of the stand?\u003c\/h3\u003e\n\u003cp\u003eProduct size is specified as \u003cstrong\u003e248 × 193 × 151 mm\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003e11) How heavy is it?\u003c\/h3\u003e\n\u003cp\u003eThe stand's weight is specified as \u003cstrong\u003e830 g\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003e12) What is \"mesh\" for?\u003c\/h3\u003e\n\u003cp\u003eMesh helps with stability and positioning within the frame, allowing probes to be adjusted and held in the correct position.\u003c\/p\u003e\n\u003ch3\u003e13) Do I need an SD card or software for the frame?\u003c\/h3\u003e\n\u003cp\u003eNo, the frame is a mechanical aid (with LED power). The software belongs to your programmer, not the frame.\u003c\/p\u003e\n\u003ch3\u003e14) Can I use the frame for all ECUs?\u003c\/h3\u003e\n\u003cp\u003eThe frame is general, but ECU layout and contact points vary. Compatibility depends on having the correct adapter plate\/method for your specific ECU.\u003c\/p\u003e\n\u003ch3\u003e15) Is this for beginners?\u003c\/h3\u003e\n\u003cp\u003eYes, it can be used by beginners, but requires accuracy and adherence to documentation for your programmer and ECU.\u003c\/p\u003e\n\u003ch3\u003e16) Is LED lighting mandatory?\u003c\/h3\u003e\u003cp\u003eNo, but it makes the work significantly easier, especially with small contact points.\u003c\/p\u003e\n\u003ch3\u003e17) Why is stable contact so important?\u003c\/h3\u003e\n\u003cp\u003eLooseness during sensitive operations can cause interruptions, incorrect results, and unnecessary wear on contact points.\u003c\/p\u003e\n\u003ch3\u003e18) Can I use this to bypass anti-theft?\u003c\/h3\u003e\n\u003cp\u003eNo. The product should be used for legitimate service\/diagnostics. We do not support its use to bypass immobilizers or unauthorized access.\u003c\/p\u003e\n\u003ch3\u003e19) Do I need 12V power for the frame to work?\u003c\/h3\u003e\n\u003cp\u003eOnly for the LED lighting. The frame\/probes themselves are mechanical.\u003c\/p\u003e\n\u003ch3\u003e20) What do I do if the probes wear out?\u003c\/h3\u003e\n\u003cp\u003eProbes and needles are consumables. Replace worn tips and store them protected for a longer lifespan.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003ePackage Contents – what's included\u003c\/h2\u003e\n\u003cp\u003eContents may vary slightly between different packages, but according to the product lists, it includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 pc × \u003cstrong\u003eBDM frame\u003c\/strong\u003e (main stand)\u003c\/li\u003e\n\u003cli\u003e1 pc × \u003cstrong\u003eBDM frame with LED\u003c\/strong\u003e (acrylic base with LED)\u003c\/li\u003e\n\u003cli\u003e4 pcs × \u003cstrong\u003ecables for probes\u003c\/strong\u003e (2 red + 2 black)\u003c\/li\u003e\n\u003cli\u003e4 pcs × \u003cstrong\u003eprobes\u003c\/strong\u003e (2 fine needles + 2 coarse needles)\u003c\/li\u003e\n\u003cli\u003e4 pcs × \u003cstrong\u003ecopper needles\u003c\/strong\u003e (2 red + 2 black) according to standard configuration\u003c\/li\u003e\n\u003cli\u003e1 pc × \u003cstrong\u003epower adapter\u003c\/strong\u003e (12V 500 mA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eDisclaimer \u0026amp; important notices\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLegitimate use only:\u003c\/strong\u003e Use the equipment for service\/diagnostics where you have permission and authorization.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo \"how-to\" for bypassing:\u003c\/strong\u003e We do not provide instructions for bypassing immobilizers, anti-theft systems, or other security features.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRisk of damage from improper use:\u003c\/strong\u003e Incorrect pressure\/angle can damage pads\/circuit boards. Adjust the probes carefully.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESD \u0026amp; safety:\u003c\/strong\u003e Static electricity and short circuits can destroy the ECU. Work anti-statically and cleanly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFollow tool documentation:\u003c\/strong\u003e Exact connection and method depend on the programmer\/adapter board and ECU type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eConcluding summary\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBDM PRO Frame 4 Probes\u003c\/strong\u003e is a stable and workshop-friendly \u003cstrong\u003eECU test stand\u003c\/strong\u003e made of plexiglass with mesh, 4 adjustable probes, and (in the LED version) 12V lighting. It is designed to make BDM\/bench work more stable, more precise, and gentler on the ECU board through controlled pressure and better fixturing. With stated compatibility for FGTECH\/BDM100\/KTM100\/CMD\/Dimsport, among others, it serves as a professional accessory in a serious diagnostics and service setup. ✅\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eRelated on Felkodslasare.se\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-en\/search?q=BDM%20frame\"\u003eSearch: BDM frame\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-en\/search?q=BDM100\"\u003eSearch: BDM100\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-en\/search?q=FGTECH\"\u003eSearch: FGTECH\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-en\/search?q=KTM100\"\u003eSearch: KTM100\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-en\/search?q=ECU%20programmerare\"\u003eECU programmers \u0026amp; accessories\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-en\/search?q=prober\"\u003eProbes \u0026amp; test cables\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-en\/search?q=bench%20programming\"\u003eBench programming – accessories\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e","brand":"Felkodsläsare","offers":[{"title":"Default Title","offer_id":54177157579020,"sku":"FEL-A0083","price":41.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/4979\/6876\/files\/bdm-pro-frame-med-4-prober-led-bdm-ram-ecu-teststall-9563773.jpg?v=1782422912","url":"https:\/\/www.felkodslasare.se\/en-en\/products\/bdm-pro-frame-ecu-brush-test-stand","provider":"Felkodsläsare","version":"1.0","type":"link"}