ELM327 USB Diagnostic Cable with Switch – HS-CAN & MS-CAN – For FORScan, Elmconfig, FoCCCus, FF2 and more.
This ELM327 USB diagnostic cable with switch is a powerful tool for those who want to access more control modules than a standard OBD2 reader can. The cable is specially designed for FORScan software and other compatible software, and supports both HS-CAN (High Speed) and MS-CAN (Medium Speed) via a built-in switch. Perfect for Ford, Mazda, and other vehicles that use both HS- and MS-CAN buses.
Unlike a standard ELM327, this cable has been modified to also communicate via MS-CAN, which gives you access to more functions, tests, and configuration options.
Features
-
✅ Reads and clears fault codes (DTCs)
-
✅ Resets parameters (PIDs)
-
✅ Performs tests and service procedures
-
✅ Ability to change configuration data
-
✅ Programming of certain car models
-
✅ Easily switch between HS-CAN and MS-CAN with the built-in switch
Specifications
-
Communication: USB
-
Compatible systems: Windows XP, Windows 7 (32-bit)
-
Main chip: PIC18F25K80 + CH340T
-
Protocol support: All OBD2 protocols, incl. SAE J1850 PWM/VPW, ISO9141-2, ISO14230-4 KWP, ISO15765-4 CAN, SAE J1939, etc.
-
Switch modes:
-
HS-CAN: Pins 6 & 14
-
MS-CAN: Pins 3 & 11
-
Voltage: 9V–16V
-
Power consumption: 25mA
-
Dimensions: 10 × 6.5 × 3 cm
-
Weight: 0.12 kg
-
Language: English
Compatible software
-
FORScan
-
Elmconfig
-
FoCCCus
-
FF2
-
More supported programs
Supported vehicles
-
Suitable for many vehicles with an OBD2 port, especially Ford and Mazda (approx. 2003 onwards) that use both HS-CAN and MS-CAN.
-
Other brands are supported when they use the OBD2 standard.
Advantages compared to standard ELM327
-
🔧 Built-in switch for easy switching between HS-CAN & MS-CAN
-
🔧 More modules available than with a regular ELM327
-
🔧 Supports advanced service and programming functions
-
🔧 Stable communication via the PIC18F25K80 chip
FAQ – Frequently Asked Questions
❓ Why do I need an ELM327 with a switch?
👉 Many Ford and Mazda models (from approx. 2003) use both HS-CAN and MS-CAN. A standard ELM327 only reaches HS-CAN, but with the switch, you gain access to more control modules and functions.
❓ Does it work on all cars?
👉 It works on most cars with OBD2, but is primarily optimized for Ford and Mazda. Check that your car uses HS- or MS-CAN before purchase.
❓ Which software should I use?
👉 FORScan is recommended, but Elmconfig, FoCCCus, and FF2 also work.
❓ Does it work on Mac or Linux?
👉 No, it is only tested and guaranteed compatible with Windows XP and Windows 7 (32-bit).
❓ Is this a real ELM327 V1.5?
👉 Yes, it uses a genuine PIC18F25K80 chip and supports full OBD2 protocols.
👉 Buy your ELM327 USB Diagnostic Cable with switch for HS/MS-CAN today from felkodslasare.se and get a stable, reliable, and professional solution for advanced vehicle diagnostics!
